Tips For Winterizing Your Inground Swimming Pool

September 28, 2023 · 5 min read

Key Takeaways:

Clean and balance the pool water before winterizing for its safety and health.
Add winter chemicals to keep the water clean and clear during cold months.
Drain and cover the pool to prevent freezing, damage, and debris.
Protect your equipment by draining and cleaning all components, storing them in dry areas, and inspecting them regularly.
Perform regular maintenance during winter to prepare for spring use.
When opening the pool in the spring, check the equipment, refill the water, and replace damaged parts.

Did you know there are over 10.7 million swimming pools in the United States?

As much as we love our swimming pools during the warm summer, winter is a different story. Cold temperatures, ice, and snow can wreak havoc on a pool if it's not adequately prepared for winter. This is where winterizing your inground pool comes in.

Winterizing your inground swimming pool is crucial for protecting your investment and ensuring that it's ready to use when the warmer weather returns. In this article, AsureNet provides expert tips on properly winterizing your inground pool, including cleaning and balancing the water, draining and covering the pool, protecting your equipment, and maintaining your pool throughout the winter season. So, let's dive in and get your pool ready for winter!

Clean Sweep: How to Properly Clean and Balance Your Inground Swimming Pool Water

Before we learn how to winterize your inground pool, it's essential to ensure you have a properly balanced and clean pool. A clean and well-balanced pool is essential for the health and safety of your swimming pool, so don't skip this step! Here's what you need to do:

1. Skim and Brush the Pool

Keep your pool crystal clear using a skimmer net to remove any leaf or bug debris on the water's surface. Later, use a pool brush to meticulously scrub away any dirt and algae buildup along the walls and floor of the swimming area.

2. Vacuum the Pool

Use a vacuum cleaner or suction to remove dirt and debris that's settled at the bottom of your pool. Make sure to get rid of any bits of leaves or twigs.

3. Test the Water Chemistry

Testing the water chemistry is essential for ensuring that your swimming pool is safe and healthy for swimming when winter ends, and it's time to open up your inground pool again! Use a pool test kit to check for pH, alkalinity, calcium hardness, total dissolved solids, stabilizer levels, and other factors that affect water quality. Before you close your pool for the winter, make sure to test it at least twice a week. Doing so will ensure everything is functioning correctly and ready for next season!

4. Add Winter Chemicals

Adding winter chemicals such as algaecide, stain remover, and pool shock to your pool is important in keeping the water clean and clear throughout the cold months. The chemicals will help prevent algae growth, keep the pool clean, and ensure it's ready for the next season. Follow the manufacturer's instructions when adding any chemical to your pool.

Drain the Swamp: Why Drain and Cover Your Inground Swimming Pool for Winter?

In most cases, to avoid damage caused by frigid temperatures, draining a portion of the water from your inground pool before winter is essential. The amount that must be drained varies depending on the climate in your locale and the pool cover.

In freezing climates, during the winter months, lowering the pool water level is recommended. If you use a solid cover, the depth must be six inches under it; if using a mesh cover, twelve inches should suffice. If you don't own a pool cover, contact a professional pool installer to get the right one for your pool.

Winter is Coming: Protecting Your Pool Equipment

Now that you’ve lowered the water level, it's time to prepare your inground swimming pool equipment for wintertime. Here are some steps to follow:

1. Drain the Equipment

To ensure your pool equipment lasts, drain all filtration and pump components. Be sure to empty any lids or other parts that could collect water and freeze during cold temperatures.

2. Clean the Equipment

Dry any remaining moisture with a clean cloth before storing them for the winter. Scrub down all surfaces with a wire brush to remove dirt or debris, then treat it with an approved conditioner before storing it.

3. Store Them Properly

Once everything is cleaned and conditioned, store each removable piece of equipment in a dry area without freezing temperatures. This will help prevent corrosion and damage from occurring over the winter months.

Winter Maintenance: Don't Let Your Guard Down

Even though your pool is closed, some maintenance is still necessary. Make sure to check the water levels regularly and add chemicals as needed. Also, periodically inspect the pool's surrounding area for damage, debris, or leaves that may have fallen in during windy weather. It's best to use a pool cover specifically designed for winter use, as it will prevent leaves, debris, and other items from entering your pool.

Tips For Opening The Pool In Spring

Before opening your inground swimming pool, you'll need to ensure all the equipment is clean and functioning properly. Check all the mechanical components, such as pumps and filter systems, to ensure everything works correctly before turning them on. Additionally, you'll need to refill any water that was lost due to evaporation during the winter months and test it for the chemical balance once again. Finally, remove any dirt and debris from the pool and replace damaged parts as needed.

To Wrap Up: Conclusion and Final Thoughts

In conclusion, your inground swimming pool needs extra care during the winter months to help prevent any damage or problems when it's time to open it up in the spring. Clean and balance the water before freezing temperatures arrive, drain some of the water if you live in an area with heavy snowfall, protect all pool equipment from harsh weather conditions, and invest in regular maintenance for your pool. A few simple steps now can save you many headaches later on!

Winterize Your Pool Like a Pro with AsureNet Pool Covers

Don't let winter damage your inground pool. Trust AsureNet's pool auto covers for reliable protection. Serving Downers Grove, IL, our top-quality covers are designed to keep debris out and prevent freezing.

Posted in:

how to fit a swimming pool in your yard in Illinois

Apr 23, 2026 in AsureNet Blog

Can I Fit a Swimming Pool?

In most cases, yes—but it’s not just about square footage. A typical in-ground pool needs: Enough open space for the pool itself Setback clearance from property lines Room for decking, access, and equipment Many suburban lots around Naperville range from 8,000 to 12,000 square feet. That’s often enough space for a well-designed pool, even if the yard isn’t wide open. What usually matters more than size: more Tree placement Property line setbacks Utility lines underground Drainage conditions A good builder doesn’t just ask “how big is your yard?” They look at how to make the space work. How Big Does a Backyard Need to Be for a Pool? There’s no one-size number, but here’s a realistic guide: Small pools: Fit in tighter suburban yards (think plunge pools or compact designs) Standard pools: Usually need a moderate-sized yard with clear access Large custom pools: Require more open space and fewer restrictions In Naperville and surrounding areas, local codes often require: Minimum distance from property lines Safety fencing Permit approvals This is where many homeowners get stuck. The yard looks big enough, but zoning or layout creates challenges. Common Concerns in Naperville and Nearby Suburbs Homeowners in this area tend to run into the same questions: Will I need permits? How close can the pool be to my house or fence? What about drainage after heavy rain? Can construction fit through my side yard? Will my HOA allow it? These aren’t deal breakers, but they do affect how the pool is designed and installed. Can I Put a Swimming Pool In My Backyard? In most cases, yes—you can. Even if your yard has limitations, there are ways to: Adjust pool size and shape Work around property lines Design for tight access points Use materials that speed up installation The key is working with a builder who knows how to adapt to suburban properties instead of forcing a one-size design. Faster Installation Than You Think One of the biggest misconceptions is how long it takes to install a pool. Traditional builds can drag on for months. But with the right system and planning, Asure Net can complete a pool installation in as little as 2 to 3 weeks. That’s a major advantage in places like Naperville where: Weather windows matter Homeowners want minimal disruption Summer timelines are tight Final Thought If you’re asking, “Can I put a swimming pool in my backyard?” —you’re already in the right place. Most properties in Naperville and surrounding suburbs like Burr Ridge, Oak Brook and Northbrook can support a pool with the right approach. The difference comes down to design, experience, and how efficiently the project is handled. If you want a clear answer based on your yard, reach out to Asure Net. A quick review can tell you what’s possible and how fast you can get it done.

Here is what determins the cost of a swimming pool.

Dec 24, 2025 in AsureNet Blog

How Much Does an Inground Pool Cost in Naperville, IL?

The cost to install an inground pool in Naperville, IL depends on the pool type, site conditions, and features you choose. Most homeowners researching pool installation near me are comparing options before committing to a design or installer. In general, inground pool installation costs more upfront than above-ground pools, but offers greater durability, customization, and long-term value—especially in established Naperville neighborhoods. Average Inground Pool Installation Cost in Naperville more In Naperville, the pool installation cost varies because each property is different. Lot access, soil conditions, drainage requirements, and local permitting all affect pricing. Homes in areas like South Naperville, Ashwood Park, and older neighborhoods near downtown often require additional planning that influences cost. Fiberglass pool installation is commonly selected because it installs faster and requires less long-term maintenance. Installing a fiberglass pool typically costs less than fully custom concrete builds while still delivering a high-end finish. Concrete pools allow more customization but involve higher labor and longer timelines. What Drives the Cost to Install a Pool? The cost to install a pool is shaped by a few key factors: Pool type – fiberglass vs. concrete Backyard layout – access, grading, utilities Add-ons – pool heater installation, lighting, automation Decking – concrete pool deck installation and layout Permits and inspections – required in Naperville Pool installation companies that account for these details upfront provide more accurate pricing and fewer surprises during construction. Common Concerns When Planning an Inground Pool Homeowners often worry about timelines, maintenance, and whether the finished pool will match their expectations. Others are concerned about Illinois weather, seasonal use, and choosing the wrong system for long-term performance. These concerns are valid. That’s why working with an experienced swimming pool installer matters more than choosing the lowest estimate. How AsureNet Helps Naperville Homeowners AsureNet simplifies backyard pools installation by focusing on planning before construction. Homeowners receive a free estimate and a custom 3D digital pool design, allowing them to see exactly how the pool will fit their space before work begins. AsureNet also manages permitting, coordinates trades, and helps homeowners select materials and features that make sense for Naperville’s climate and lifestyle—reducing delays and unexpected costs. Is an Inground Pool Worth It? Beyond installation cost, an inground pool delivers everyday value. It creates space for family time, entertaining, fitness, and relaxation. In Naperville, where outdoor living is a priority during warmer months, a private swimming pool turns a backyard into a personal retreat. With the right planning and installer, an inground pool becomes an upgrade you enjoy daily—not a project you regret.

Nov 15, 2023 in AsureNet Blog

5 Tips To Upgrade Your Swimming Pool

Key Takeaways: Upgrading your pool liner, installing auto covers, and changing coping can refresh the look and functionality of your swimming pool, ensuring its longevity. Incorporating water features like diving boards and upgrading your pool deck can enhance your area's overall aesthetics and enjoyment. Hardscapes such as outdoor kitchens, retaining walls, outdoor fireplaces, and patios seamlessly complement your pool, adding convenience, ambiance, and style. Embrace expert recommendations to create a harmonious and captivating pool oasis that reflects your style and enhances your outdoor living experience. Transform your swimming pool into a stunning retreat, elevating relaxation entertainment and making lasting memories with family and friends. Swimming pools have long been cherished as a gateway to tranquility and recreation. They transform ordinary outdoor spaces into havens of relaxation and serenity. But these aquatic retreats require more than a hefty investment— around $28,000 on average —to maintain their pristine beauty. Inground swimming pools are susceptible to wear and tear due to nature’s relentless forces. Without proper care, pools could quickly become unsightly and hazardous. Fortunately, simple updates and upgrades can revitalize your swimming pool, ensuring its longevity and preserving its allure. AsureNet will explore essential tips to revitalize your pool, enhancing its aesthetic appeal and functional efficiency. In addition, we'll also recommend some hardscapes that work well with an inground swimming pool. Essential Upgrades for Your Swimming Pool Upgrade 1: Update Pool Liner Updating the liner is one of the most impactful upgrades to your inground swimming pool. Over time, pool liners can fade, crack, or become worn, diminishing the overall aesthetic appeal of your oasis. Replacing the pool liner allows you to instantly breathe new life into your pool, creating a fresh and vibrant environment. Choose from a wide range of materials, colors, and designs to match your style and enhance the visual appeal of your pool. Upgrade 2: Install Pool Auto Covers Say goodbye to the hassle of manually covering and uncovering your pool by installing auto covers. These innovative covers provide convenience, safety, and energy efficiency. These automatic covers can effortlessly protect your pool from debris, reduce evaporation, and maintain water temperature. Not only do pool auto covers simplify maintenance, but they also improve pool safety by preventing accidental access to the pool. Embrace the convenience and peace of mind that pool auto covers bring to your swimming pool experience. Related: The Benefits Of Getting A Pool Cover For Your Backyard Splash Upgrade 3: Change Coping Coping is the edge material that surrounds the perimeter of your pool, and it plays a vital role in both functionality and aesthetics. Changing the coping can dramatically transform the swimming pool's aesthetics. Opt for natural stone, pavers, or tiles to create a stunning visual impact. Not only will updated coping enhance the overall beauty of your pool, but it also adds durability and improves safety by providing a non-slip surface for swimmers. Upgrade 4: Install Water Features like Diving Boards Elevate your inground swimming pool experience by installing captivating water features like diving boards. Diving boards add excitement and adventure to your pool, creating a focal point that draws attention and enhances overall aesthetics. Choose various designs and materials that suit your pool style and complement your outdoor space. Whether you prefer an old classic look or a modern twist, adding water features like diving boards will make a splash among your family and friends. Upgrade 5: Upgrade Pool Deck The pool deck is the foundation of your outdoor oasis, serving as a space for relaxation, sunbathing, and entertaining. Upgrading your pool deck can transform it into a stylish and functional area that seamlessly blends with your swimming pool. Consider materials like stamped concrete, natural stone, or composite decking, which offer durability, low maintenance, and a wide range of design options. An upgraded pool deck enhances the aesthetics and improves safety with slip-resistant surfaces. Create a welcoming and luxurious atmosphere around your pool with a refreshed and upgraded deck. Hardscapes That Complement Your Swimming Pool Hardscapes play a crucial role in elevating the ambiance and functionality of your pool area. These expertly crafted additions enhance the aesthetics and provide practical features that seamlessly integrate with your swimming pool. Explore some hardscape options that transform your pool area into a captivating outdoor retreat. Outdoor Kitchen An outdoor kitchen epitomizes convenience and entertainment, allowing you to enjoy delicious meals while basking in the poolside ambiance. Expert pool builders recommend incorporating an outdoor kitchen into your pool area to create a seamless flow between culinary delights and aquatic pleasures. Retaining Walls Retaining walls serve functional and aesthetic purposes in your pool area. Expertly designed by pool builders, these structures can help level uneven terrain, provide additional seating, and create distinct zones within your outdoor space. Retaining walls also offer an opportunity to showcase your style, as they can be constructed using natural stone, brick, or concrete materials. Outdoor Fireplace Expert pool builders often recommend incorporating an outdoor fireplace as a focal point, creating a cozy and inviting atmosphere. Imagine lounging by the pool, mesmerized by the crackling flames and the enchanting glow. An outdoor fireplace provides a source of warmth and adds an elegant touch to your poolside oasis. Patios A well-designed patio is a fundamental element that ties together your swimming pool and surrounding landscape. A patio enhances your pool area's functionality and aesthetics. It is constructed with durable and visually appealing materials, such as concrete pavers or natural stone. It provides a comfortable space for lounging, sunbathing, and socializing, adding versatility and style to your poolside retreat. Final Thoughts Updating and enhancing your swimming pool with these expert-recommended upgrades and hardscapes can transform your outdoor space into a breathtaking retreat. Each addition brings its charm and functionality. Embrace the potential of your pool and create a haven that reflects your style, elevates your enjoyment, and leaves a lasting impression on all who experience it. Experience Pool Perfection with AsureNet Ready to transform your swimming pool into a stunning oasis? Contact AsureNet, the leading inground swimming pool builders in Wheaton, IL. From pool auto covers to liner replacements, our expert team provides comprehensive solutions tailored to your needs. Let us bring your pool dreams to life. Contact us today and receive a free estimate for your inground swimming pool requirements.